HPE Aruba Networking AP-MNT-A Campus AP mount bracket kit (individual) type A: suspended ceiling rail, flat 9/16
£15.50
Out of stock
The Aruba AP-MNT-A Suspended Ceiling Rail Mounting Bracket is designed for attaching access points to T-rails. The low-profile design means that there will be limited space between the back of the AP and the mount surface. This mount kit is designed to work with the pre-assembled bracket on the back of Aruba APs.
Three pieces total:
Two rails assemble around the Tee rail, held together with a small clip on the tail side.
The AP mount attaches with two screws to the AP, and then slides around the two Teerail assemblies.
Secure with the spring loaded pin and then tighten the retention screw to lock it in.
